What Causes Power Trip in HDB?

What Causes Power Trip in HDB? It is common for most residents to experience a power trip in one way or another. HDB power trips are quite annoying and especially come when least expected. In Singapore, the Housing and Development Board is responsible for public housing that came into existence in 1960. The HBD circuit breaker exists and performs safety tasks and occurs in different amp ratings. This means that some can handle more power than others.

It is better to contact a professional repair service to resolve the issue of power trip but first understand its causes.

Causes of Power Trip

There are very few causes for this which is very common, and they include:

1. Electricity overload

This is the leading cause of power trips in HDB flats. The electrical circuit protects each circuit, and it regulates the power that each wire can handle. When you pull too many devices in a particular channel, the circuit breaker trips and immediately cut off the electricity, it will protect you from electrocution or damage the machines that were using the power.

In extreme cases, there may be electrical fires that will cause injuries to the people in the flats. Ask your professionals on how many appliances can be loaded to reduce the chances of overloading it.

2. Loose connections

It is an apparent cause, and you should be very careful about the lousy wiring in your house. They may be caused by wearing of electrical wires and lead to increased resistance. When resistance increases, there will be a generation of heat, causing them to overheat. It is quite easy to spot loose wiring and try fixing it up or contact an electrician if it is risky.

3. Short-Circuiting

This is a problem that can cause severe problems, and you need to be on the lookout for this. There is a large amount of power, causing it to trip. Electrical fires are the worst occurrence as it leads to the death of people in HDB flats.

Short-circuiting can, therefore, occur in the electric appliances of your home. It is difficult for you to identify its source, and the best option is to contact an electrician for help.

4. Grounding Faults

If the circuit breaker trips due to ground faults, it can also be a short circuit. This happens in the case where a heated or hot wire touches the ground wire. It can even feel the metal enclosure that connects to the ground wire. It will just be the same as a short circuit where much power will pass through the channel.

This will cause the power to trip as it has exceeded the circuit’s capacity. This should be immediately attended to without wasting much time by a qualified electrician.

5. Defective electrical devices

When you come to think of electrical devices, you are sure that faulty ones will cause power to trip. This may include electric kettles and better repair them before plugging them in power. These devices draw a lot of energy in HBD circuits and will cause the tripping of circuit breakers.

Those are the causes, and how can you prevent yourself from the power trips?

Preventing Power trips in HDB

You don’t use all electrical appliances at once and so unplug those that are not in use. This ensures that electricity is not overloaded, which may cause power trips.

Be aware of the electrical appliances that you plugin every time. This is important, especially during sunny days, as it worsens the problem due to overheating.

Avoid practices that may damage the electrical wires. These practices may include placing heavy objects on them, overstretching, or bending them.

Have fewer points at home and avoid using an extension plug as it will surely overload. This will occur because an HDB circuit breaker that you won’t be expecting it.