What To Do If Electricity Keeps Tripping?
October 25, 2022Smart Home Automation (Pros and Cons)
February 2, 2023Warning Signs Before An Electrical Fire At Home
Warning Signs Before An Electrical Fire At Home. It takes a lifetime to build a home but it can burn down to flames in minutes that will leave you empty-handed. This happens every year with thousands of people who see all their life belongings go down the drain. It’s not just the property that is damaged, but lives are also compromised which leaves permanent marks on the ones left behind.
These scary incidents of electrical fires can be avoided by being cautious and both life and property damage can be dodged. All you need to do is read between the lines, be careful and start interpreting the signs beforehand.
No fire starts without any reason; it’s just that most of the time people tend to ignore these warning signs. You just need to keep an eye on the minor changes and occurrences to make them right on time. Life has no undo button so be prepared and watch out for yourself, your loved ones and yes obviously your dream home.
Warning signs
1. A Constant Burning Smell
If you are smelling that something is burning, please just don’t ignore it. Stand up, and leave your couch. Look for the source of the smell. Keep looking for it until you find it and switch off that particular power section. You can also switch the whole electrical system if you are not sure about what button to shut off. Call an expert electrician and ask him to fix the issue.
If in case you see smoke coming out and you possibly cannot switch off the button then immediately get out of the house and call 955.
Additional Tip: A lot many people opt for water when there is a fire but it’s a no-no thing with electrical fires. It adds to the risk of electrocution. So act wisely and call 995. Let the experts do what they need to do if it’s gotten already out of hand.
Also always have a fire extinguisher and make sure that you and your family know how to use it.
2. Frequent Tripping Of Circuit Breaker
The main job of the circuit breaker is to disconnect electricity to your home if it overheats thus evading electrical fire. If it happens occasionally then that’s fine but if it is happening frequently then this is something you need to worry about.
What You Need To Do: If the tripping is happening frequently then you need to check a few things.
- Your circuit is overburdened and your appliances are consuming a lot of electricity resulting in them getting overheated and increasing the risk of fire. If that’s the case you need to move your appliances around on other switches connected to other breakers.
- There might be some short-circuiting. It usually happens when a live or hot wire touches a neutral wire. The strong current as a result heats the circuit and can turn into a fire. This can be very lethal and you’ll need an electrician to fix the issue.
- Your circuit is ghastly and has ground faults. This happens in areas with high moisture but can be avoided with Ground Fault Circuit Interrupter (GFCI). You’ll once again need an electrician to do the job.
3. Numerous Discolored Or Charred Outlets and Switches
Have you observed a discrete discoloration of a switch or maybe a few of your outlets have stopped working altogether? This is what you need to look for and make it right before it’s too late.
Discoloration normally depicts that there has already been a minor electrical spark that has left its mark on the switch or outlet. This immediately needs to be addressed and cannot be ignored at any cost.
What you need to do is call an electrician and ask him to repair and check the switch. Don’t start doing it yourself if you don’t know the dos and don’ts about it. Better call an expert and let him do the job.
Additional Tip: One more way to know whether the switches are working properly or not is to touch the plates that are covering them. If you feel that they are hot against your palm then that indicates that the connectors and wires are overheated and need to be checked.
4. Old And Outdated Wiring
According to the research older homes with outdated wiring do not hold the capacity to handle the load consumed by modern electrical appliances. This overload of electricity consumption can result in overheating of circuits and sparks causing disastrous fires.
Additional Tip: Instead of seeing your all-life savings burn right in front of you, be smart and invest a little amount to get the whole house rewired. Call an electrician, pay him a few bucks and save yourself from larger property and life damages.
What You Need To Be Careful About
There might be a few things that might not always give a sign before turning into a nightmare. So be aware of the following things.
- Wiring should be checked at least every four years. Damaged and old wiring should be replaced with a new one.
- If your lights flicker frequently then that indicates that there is some issue. Get it fixed before it’s late.
- Don’t ever use a lot of power bars and extension cords. That puts the circuit under a lot of pressure resulting in some serious damage.
- If you find even a very little and minor issue with anything don’t take it lightly and get it checked. Getting it checked should be your priority. After all, life is the most precious gift of God and should be taken care of.
Warning Signs Before An Electrical Fire At Home – Conclusion
Life certainly does not have an undo button so it’s better and an intelligent move on your part to take precautionary measures beforehand. Addressing problems earlier can save you from costly damages in the future. So it’s better to not let even the minor issues slip through and take notice immediately.
Warning Signs Before An Electrical Fire At Home. If you happen to notice any of the above mentioned things all you need to do is make them right when it’s still time and save your life and property. Don’t let a spur of carelessness ruin your life savings.